Highway - Construction Section Qualified Products Information

Text Size: A+| A-| A | Text Only Site | Accessibility

Highway - Construction Section

Qualified Products Information


AASHTO and ASTM Publications	Pavement Markings	Automated Flagger Assistance
How To Get A QPL	PCC Patching
Impact Attenuator - Permanent	PCMS PVMS - Changeable
NCHRP Report 350	Portable Traffic Signals
Pavement Marker Adhesives	Slow/Stop Paddles
Pavement Marker Types	Temporary Tape Types


AASHTO and ASTM Publications

If you need copies of any AASHTO or ASTM publications you will need to contact those organizations directly. Copies may also be available at the public library or at local bookstores. We cannot supply copies of these documents. You can get AASHTO publications by contacting: American Association of State Highway and Transportation Officials 444 North Capital Street NW, Suite 249 Washington, DC 20001 Phone: (800) 231-3475 Fax: (800) 525-5562 Website: https://bookstore.transportation.org You can get ASTM publications by contacting: American Society for Testing and Materials 100 Barr Harbor Drive West Conshohocken, PA 19428-2959 Phone: (610) 832-9585 Fax: (610) 832-9555 Website: http://www.astm.org


How To Get A QPL

E-mail Copies E-mail Copies If you would like to be added to the e-mail group to get an electronic copy of the QPL, please click on the link above. Electronic Versions PDF Document This is a complete document exactly like the paper copy. It includes the supporting data, indexes, the list of qualified products, and the list of projects that have been rejected. There are rudimentary search routines available. Internet Version You can access the document on the Internet. There are search and sort features. After you do your searches, you can print the results. It allows access to the Qualified List and the Rejected List. Hard Copies Hard copies of the QPL are not available for contractors or manufacturers anymore. Please use one of the electronic versions.


Impact Attenuator - Permanent

Permanent Impact Attenuator Product Review Guidelines Impact Attenuator Attribute Checklist Impact Attenuator Attributes


NCHRP Report 350

NCHRP Report 350 Work Zone Device Definitions (Link to FHWA website) Self Certification - Category 1 (ODOT form to be included with each category 1 product submitted) FHWA Work Zone Device - Category 2 Acceptance Letters (Link to FHWA website) Traffic Barriers, Barrier Terminals, Crash Cushions, and Bridge Railings - Category 3 Acceptance Letters (Link to FHWA website) MASH (PowerPoint Presentation) FHWA Safety Website (Link to FHWA website)


Pavement Marker Adhesives

Flexible Bituminous Pavement Marker Adhesive Standard Bituminous Pavement Marker Adhesive Epoxy Pavement Marker Adhesive


Pavement Marker Types

Type 1 Pavement Markers Type 1AR Pavement Markers Type 1 Recessed Pavement Markers Type 2 Pavement Markers

Pavement Markings

Pavement Markings - Longitudinal - Standard

PRODUCT REVIEW GUIDELINES	This outlines the documents and procedures needed to submit a product.
ODOT SPECIFICATIONS	This is a link to the ODOT Standard Specifications. The appropriate specifications for Longitudinal-Standard Markings are 00860 and 00850. Check the Special Provisions for updates.
ODOT STANDARD DRAWINGS	ODOT Standard Drawings for Pavement Markings can be found at this site.

Pavement Markings - Longitudinal - High Performance

PRODUCT REVIEW GUIDELINES	This outlines the documents and procedures needed to submit a product.
WARRANTY CERTIFICATION	Here is our warranty certification statement. This is required for each of the products you wish to submit.
RECOMMENDED WARRANTY STATEMENT	This is our recommended warranty statement. A document similar to this will be required on each project at the time of construction.
ODOT SPECIFICATIONS	This is a link to the ODOT Standard Specifications. The appropriate specifications for Longitudinal-High Performance Markings are 00866 and 00850. Check the Special Provisions for updates.
ODOT STANDARD DRAWINGS	ODOT Standard Drawings for Pavement Markings can be found at this site.

Pavement Markings - Longitudinal - Durable

PRODUCT REVIEW GUIDELINES	This outlines the documents and procedures needed to submit a product.
WARRANTY CERTIFICATION	Here is our warranty certification statement. This is required for each of the products you wish to submit.
RECOMMENDED WARRANTY STATEMENT	This is our recommended warranty statement. A document similar to this will be required on each project at the time of construction.
ODOT SPECIFICATIONS	This is a link to the ODOT Standard Specifications. The appropriate specifications for Longitundinal-Durable Markings are 00865 and 00850. Check the Special Provisions for updates.
ODOT STANDARD DRAWINGS	ODOT Standard Drawings for Pavement Markings can be found at this site.

Pavement Markings - Transverse

PRODUCT REVIEW GUIDELINES	This outlines the documents and procedures needed to submit a product.
WARRANTY CERTIFICATION - Standard Skid	Here is our Standard Skid warranty certification statement. This is required for each of the products you wish to submit.
WARRANTY CERTIFICATION - High Skid	Here is our High Skid (skid resistant) warranty certification statement. This is required for each of the products you wish to submit.
RECOMMENDED WARRANTY STATEMENT	This is our recommended warranty statement. A document similar to this will be required on each project at the time of construction.
ODOT SPECIFICATIONS	This is a link to the ODOT Standard Specifications. The appropriate specifications for Transverse Markings are 00867 and 00850. Check the Special Provisions for updates.
ODOT STANDARD DRAWINGS	ODOT Standard Drawings for Pavement Markings can be found at this site.

Pavement Markings - Reflective Elements

PRODUCT REVIEW GUIDELINES - STANDARD	Standard AASHTO M247 (modified) reflective elements made from recycled glass.
PRODUCT REVIEW GUIDELINES - LARGE VIRGIN GLASS	Large reflective elements made from virgin glass.
PRODUCT REVIEW GUIDELINES - CUSTOM	Information coming.


PCC Patching

PCC Patching PCC Patching Questionaire


PCMS PVMS - Changeable

Trailer Mounted Standard Guideline for Product Review Trailer Mounted PVMS/PCMS Specifications (Attachment A) Checklist and Certification of Compliance (Attachment B) Group Evaluation (Attachment C) Truck Mounted Standard Guideline for Product Review Truck Mounted PVMS/PCMS Specifications (Attachment A) Checklist and Certification of Compliance (Attachment B) Group Evaluation (Attachment C) Permanently Mounted PCMS/PVMS Changeable Message Sign


Portable Traffic Signals

Portable Traffic Signals Worksheet Fill out and submit with each Submittal for a Portable Traffic Signal.


Slow/Stop Paddles

Stop Slow Paddle (no lights) Stop Slow Paddle with Flashing Lights


Temporary Tape Types

Removable Temporary Tape Non-Removable Temporary Tape Removable, Non-Reflective Tape


Automated Flagger Assistance

Product Review Guideline This document lists the requirements we have for this category of product. As part of your submittal you will also need to include one of the next two worksheets, depending on the type of AFAD you are submitting. Red and Yellow Lens AFAD Worksheet Stop-Slow Sign AFAD

Page updated: August 06, 2009

Adobe Reader is required to view PDF files. Click the "Get Adobe Reader" image to get a free download of the reader from Adobe.