Text Size:   A+ A- A   •   Text Only
Oregon Department of Transportation Logo
Environmental/Erosion Control Inspector
Introduction
Materials List
General Environmental Manual
Erosion Control Inspection
Purchase Materials
Introduction
 
 
Below is the list of materials used during the training session. These materials are necessary for taking the Erosion Control Inspector Certification exam.
 
Hyperlinks are provided to take you to the PDF versions of the documents.
 
File sizes are listed after the title. As you can see, the complete manuals are very large. Entire manuals will take a longer time for your computer to open because of their size. Each chapter is also available if you prefer to open smaller individual files. There is no fee to print copies of any part of these manuals from your computer.
 
 
If you have questions about the Inspector Quality Assurance Program, training, or challenging any of the Inspector Certification exams, contact Lori Butler by e-mail at lorraine.e.butler@odot.state.or.us or by phone at (503) 986-3007.
 

Materials List
 
 
All of the materials noted below are the responsibility of the individual taking a challenge exam unless otherwise noted.
 
2008 Standard Specifications
 
General Environmental Inspector Training Manual
 
Erosion Control Inspector Training Manual
 
Erosion Control Field Manual
 
Calculator
 
 
Although the ODOT Erosion Control Manual is not necessary for the exam, a link to that document is included here for your convenience.
 

General Environmental Manual
 
Entire Manual  
General Environmental Training Manual 
10.7 M
   
Chapters  
  1 - Getting Started 
106 k
  2 - Overview 
2.3 M
  3 - Aquatic Biology 
466 k
  4 - Terrestrial Biology 
1.3 M
  5 - Hazardous Materials 
1.5 M
  6 - Wetlands & Waterways 
840 k
  7 - Cultural Resources 
679 k
  8 - Archaeology 
2.4 M
  9 - Special Provisions 
1 M

Erosion Control Inspection

Entire Manual  
Erosion Control Training Manual 
30 M
   
Chapters  
  1 - Introduction 
1 M
  2 - Permit Requirements
111 k
  3 - Erosion Processes & Impacts
14.3 M
  4 - Standard Specifications 
804 k
  5 - Construction Tools & Implementation 
(A section of these are formatted for 11 x 17 paper. Please adjust your printer as needed.)
11.2 M
  6 - Updates 
2.4 M

Purchase Materials
 
If you would rather not print these manuals from your computer, they are available for purchase.

General Environmental Inspector Training Manual
$15
Erosion Control Inspector Training Manual
$20
Erosion Control Field Manual (only available for purchase)
$20
 
 
 
 
 
 
 
Please use the Construction Section Manual Purchase Form to purchase any of these or other materials. You may send the form to Susan Herring by e-mail at susan.c.herring@odot.state.or.us or by fax at (503) 986-3096.
 

Page updated: June 30, 2011