Seal of the Landscape
(1) Every registered landscape
architect must obtain a seal of the design approved by the Board. The
seal may be a rubber stamp or a computer-generated seal.
(2) The circular seal shall be
approximately 1 5/8 inches in diameter with the word REGISTERED over
the top with a large dot at both ends of the word and the words
LANDSCAPE ARCHITECT around the bottom.
(3) The circular seal must have
space for the registrant's signature through the center.
(4) The following must be
included on the seal:
(a) The registration certificate
number above the center signature space and below the word
(b) The following information
below the center signature space and above the words LANDSCAPE
(A) The name of the registrant
below the center signature space;
(B) The word OREGON below the
registrant’s name; and
(C) The initial date of
registration below the word OREGON.
final draft of professional drawings and documents per ORS 671.379
must be stamped or printed with the seal and signed by the
registrant. Only the title page of bound specifications must be
stamped or printed with the seal and signed by the registrant.
registrant’s expiration date must be noted near the registrant’s
signature on the seal.
(7) Use of
the seal without signature by the responsible Registered Landscape
Architect is acceptable on preliminary plans, documents or drafts
prepared for review by agencies or others prior to final submittal.
Registered Landscape Architect is responsible for the custody and
proper use of the registrant’s seal. Improper use of the seal by
anyone shall be grounds for disciplinary action.
A facsimile of the design and lettering of the seal appear in the upper right: