Toledo State Airport [5S4]

The City of Toledo is located in Lincoln County. The City is on the Yaquina River along U.S. Route 20.

Toledo State Airport is approximately one mile southwest of the City.

The Airport is currently owned and operated by ODAV. It is just seven miles inland from the coast and is surrounded by wooded hills. Be advised that this airport is susceptible to flooding during high tide. Check NOTAM's for current conditions and advisories.

Runway 13/31 provides visual approaches and measures 1,750 feet in length by 40 feet in width. The Airport accommodates an estimated 1,150 general aviation operations annually. It is estimated that 96 percent of these operations are itinerant. Approximately nine aircraft are based at the Airport.

Other North Coast Airports

Airports in Other Regions

Airport Information

The Oregon Department of Aviation owns and operates 28 airports. Of these, nine airports have been designated as warning airports. These airports do not meet normal dimensional standards and have conditions that require specific pilot knowledge. They require special techniques and procedures to use safely and may not be usable by many aircraft under normal conditions.

If you have not flown into Cascade Locks, Crescent Lake, McKenzie Bridge, Owyhee Reservoir, Pacific City, Pinehurst, Santiam Junction, Toledo, or Wakonda Beach recently we encourage you to contact us at (800) 874-0102 to get the latest information on them.

We also encourage you to use the "sign in" boxes we have at some of the state airports. This allows us to better assess the level of use at some of our smaller airports. If you observe any problems at any of the state airports, please let us know so that we can correct the problem as soon as possible.

For specific questions regarding the State Warning Airports, contact ODAV at 800-874-0102 or mail.aviation@ODAV.oregon.gov.

Be Informed

8/22/2025

Reminder - The Oregon Department of Aviation's Pavement Maintenance Program (PMP) will be performing pavement work at the Toledo State Airport (5S4) Tuesday August 26th through Wednesday August 27th.

This work will include asphalt patching, crack sealing, and refreshing airfield markings on the runway and taxiways.

Toledo

The runway and taxiways will be closed at 5S4 beginning 8am Tuesday August 26th, and is anticipated to reopen at 8pm Wednesday August 27th*. *Reopening times are subject to change.

We will reopen the runway and taxiways as soon as this work is finished. Work may continue on the apron after the runway and taxiways are reopened.

(!) Please check NOTAMs for closure times and the most current airport surface closures.

(!!) Helicopters may arrive or depart directly to/from open areas of the airport. As always, please remain outside of, and avoid low flight over closed work areas.

Thank you for your patience while we maintain the Toledo State Airport.

Reminder - Toledo State Airport (5S4) - Closed for Pavement Maintenance 8/26-8/27

No Announcements